• Part: ADC12DL3200
  • Description: 12-Bit Analog-to-Digital Converter
  • Manufacturer: Texas Instruments
  • Size: 3.66 MB
Download ADC12DL3200 Datasheet PDF
Texas Instruments
ADC12DL3200
ADC12DL3200 is 12-Bit Analog-to-Digital Converter manufactured by Texas Instruments.
Features - ADC Core: - 12-Bit Resolution - Up to 6.4 GSPS in Single-Channel Mode - Up to 3.2 GSPS in Dual-Channel Mode - Internal Dither for Low-Magnitude, High-Order Harmonics - Low-Latency LVDS Interface: - Total Latency: < 10 ns - Up to 48 Data Pairs at 1.6 Gbps - Four DDR Data Clocks - Strobe Signals Simplify Synchronization - Noise Floor (No Input, VFS = 1.0 VPP-DIFF): - Dual-Channel Mode: - 151.1 d BFS/Hz - Single-Channel Mode: - 154.3 d BFS/Hz - Buffered Analog Inputs With VCMI of 0 V: - Analog Input Bandwidth (- 3 d B): 8.0 GHz - Usable Input Frequency Range: > 10 GHz - Full-Scale Input Voltage (VFS, Default): 0.8 VPP - Noiseless Aperture Delay (TAD) Adjustment: - Precise Sampling Control: 19-fs Step - Simplifies Synchronization and Interleaving - Temperature and Voltage Invariant Delays - Easy-to-Use Synchronization Features : - Automatic SYSREF Timing Calibration - Timestamp for Sample Marking - Power Consumption: 3.15 W 2 Applications - Oscilloscopes and Wideband Digitizers - Electronic Warfare (SIGINT, ELINT) - Time-of-Flight and LIDAR Distance Measurement - Microwave Backhaul - Automotive Radar Testers - Spectrometry 3 Description The ADC12DL3200 is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. In dual-channel mode, the ADC12DL3200 can sample up to 3200 MSPS and in single-channel mode up to 6400 MSPS. Programmable tradeoffs in channel count (dual-channel mode) and Nyquist bandwidth (single-channel mode) allow development of flexible hardware that meets the needs of both high-channel count or wide instantaneous signal bandwidth applications. Full-power input bandwidth (- 3 d B) of 8.0 GHz and a useable frequency range allows direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems. The ADC12DL3200 uses a low-latency, low-voltage differential signaling (LVDS) interface for latency sensitive applications or when the simplicity of LVDS is preferred....