Datasheet4U Logo Datasheet4U.com

ADS1291 - 24-Bit Analog Front-End

General Description

The ADS1291, ADS1292, and ADS1292R are multichannel, simultaneous sampling, 24-bit, deltasigma (ΔΣ) analog-to-digital converters (ADCs) with a built-in programmable gain amplifier (PGA), internal reference, and an onboard oscillator.

Key Features

  • 1 Two low-noise PGAs and two high-resolution ADCs (ADS1292 and ADS1292R).
  • Low power: 335 μW/channel.
  • Input-referred noise: 8 μVPP (150-Hz BW, G = 6).
  • Input bias current: 200 pA.
  • Data rate: 125 SPS to 8 kSPS.
  • CMRR: 120 dB.
  • Programmable gain: 1, 2, 3, 4, 6, 8, or 12.
  • Supplies: unipolar or bipolar.
  • Analog: 2.7 V to 5.25 V.
  • Digital: 1.7 V to 3.6 V.
  • Built-in right leg drive amplifier, lead-off detection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADS1201 High Dynamic Range DELTA-SIGMA MODULATOR Burr-Brown Corporation
ADS1202 Delta-Sigma Modulator Burr-Brown Corporation
ADS1203 MOTOR CONTROL CURRENT MEASUREMENT Burr-Brown Corporation
ADS1205 DELTA-SIGMA MODULATOR Burr-Brown Corporation
ADS1206 SYNCHRONOUS VOLTAGE-TO-FREQUENCY CONVERTER Burr-Brown Corporation

Other Datasheets by Texas Instruments

Part Number Description
ADS1292 24-Bit Analog Front-End
ADS1292R 24-Bit Analog Front-End
ADS1293 24-Bit Analog Front-End
ADS1294 24-Bit Analog Front-End
ADS1294R 24-Bit Analog Front-End

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community ADS1291, ADS1292, ADS1292R SBAS502C – DECEMBER 2011 – REVISED APRIL 2020 ADS129x Low-Power, 2-Channel, 24-Bit Analog Front-End for Biopotential Measurements 1 Features •1 Two low-noise PGAs and two high-resolution ADCs (ADS1292 and ADS1292R) • Low power: 335 μW/channel • Input-referred noise: 8 μVPP (150-Hz BW, G = 6) • Input bias current: 200 pA • Data rate: 125 SPS to 8 kSPS • CMRR: 120 dB • Programmable gain: 1, 2, 3, 4, 6, 8, or 12 • Supplies: unipolar or bipolar – Analog: 2.7 V to 5.25 V – Digital: 1.7 V to 3.