• Part: ADS5294
  • Description: Octal-Channel 14-Bit 80-MSPS High-SNR and Low-Power ADC
  • Manufacturer: Texas Instruments
  • Size: 2.39 MB
ADS5294 Datasheet (PDF) Download
Texas Instruments
ADS5294

Description

The ADS5294 is a low-power 80-MSPS 8-Channel ADC that uses CMOS process technology and innovative circuit techniques. Low power consumption, high SNR, low SFDR, and consistent overload recovery allow users to design highperformance systems.

Key Features

  • 1 Maximum Sample Rate: 80 MSPS/14-Bit
  • High Signal-to-Noise Ratio - 75.5-dBFS SNR at 5 MHz / 80 MSPS - 78.2-dBFS SNR at 5 MHz / 80 MSPS and Decimation Filter Enabled - 84-dBc SFDR at 5 MHz / 80 MSPS
  • Low Power Consumption - 58 mW/CH at 50 MSPS - 77 mW/CH at 80 MSPS (2-LVDS Wire Per Channel)
  • Digital Processing Block - Programmable FIR Decimation Filter and Oversampling to Minimize Harmonic Interference - Programmable IIR High-Pass Filter to Minimize DC Offset - Programmable Digital Gain: 0 dB to 12 dB - 2-Channel or 4-Channel Averaging
  • Flexible Serialized LVDS Outputs: - One or Two Wires of LVDS Output Lines Per Channel Depending on ADC Sampling Rate - Programmable Mapping Between ADC Input Channels and LVDS Output Pins-Eases Board Design - Variety of Test Patterns to Verify Data Capture by FPGA/Receiver
  • Internal and External References
  • 1.8-V Operation for Low Power Consumption
  • Low-Frequency Noise Suppression
  • Recovery From 6-dB Overload Within 1 Clock Cycle
  • Package: 12-mm × 12-mm 80-Pin QFP