Datasheet4U Logo Datasheet4U.com

DLPC200 - Digital Controller

General Description

The DLPC200 performs image processing and control and DMD data formatting to drive the 0.55 XGA DMD (DLP5500).

This digital controller gives users reliable, independent high-speed micromirror control.

It is used for structured light, display, and other spatial light modulation (SLM) applications.

Key Features

  • 1 Required for Reliable Operation of the DLP5500 DMD.
  • Stream Data Realtime With Two 24-Bit Input Ports (RGB888).
  • Port 1 Supports HDMI Input.
  • Port 2 Supports Input Via an Expansion Card.
  • High-Speed Pattern Sequence Mode.
  • Download Pattern Data Directly to Device.
  • 1-Bit Binary Pattern Rates to 5000 Hz.
  • 8-Bit Grayscale Pattern Rates to 700 Hz.
  • 1-to-1 Input Mapping to Micromirrors.
  • Programmable Reordering of Pat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DLP-IO8-G USB-BASED 8-CHANNEL DATA ACQUISITION MODULE DLP Design
DLP05LC LOW CAPACITANCE UNIDIRECTIONAL TVS Diodes Incorporated
DLP0NSA150HL2 Chip Common Mode Choke Coil Murata
DLP0NSC280HL2 Chip Common Mode Choke Coil Murata
DLP0NSN121HL2 Chip Common Mode Choke Coil Murata

Other Datasheets by Texas Instruments

Part Number Description
DLPC230-Q1 Automotive Digital Micromirror Controller
DLPC230S-Q1 Automotive Digital Micromirror Controller
DLPC231-Q1 Automotive Digital Micromirror Controller
DLPC231S-Q1 Automotive Digital Micromirror Controller
DLPC2607 Display Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community DLPC200 DLPS014F – APRIL 2010 – REVISED MAY 2018 DLPC200 DLP Digital Controller for the DLP5500 DMD 1 Features •1 Required for Reliable Operation of the DLP5500 DMD • Stream Data Realtime With Two 24-Bit Input Ports (RGB888) – Port 1 Supports HDMI Input – Port 2 Supports Input Via an Expansion Card • High-Speed Pattern Sequence Mode – Download Pattern Data Directly to Device – 1-Bit Binary Pattern Rates to 5000 Hz – 8-Bit Grayscale Pattern Rates to 700 Hz – 1-to-1 Input Mapping to Micromirrors – Programmable Reordering of Patterns • Easy Synchronization With Cameras and Sensors – Three Configurable Output Triggers – Two Configurable Input Triggers • Multiple Configuration Interfaces – Supports EDID Via