DLPC230-Q1
DLPC230-Q1 is Automotive Digital Micromirror Controller manufactured by Texas Instruments.
DLPC230-Q1, DLPC231-Q1
DLPS054G
- DECEMBER 2015
- REVISED SEPTEMBER 2023
DLPC23x-Q1 Automotive Digital Micromirror Device Controller
1 Features
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 2:
- 40°C to 105°C ambient operating temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- DMD display controller supporting:
- DLP553x-Q1 and DLP462x-Q1 automotive interior display and exterior lighting chipsets
- Video processing
- Scales input image to Match DMD resolution
- Bezel adjustment up ±50% vertical image position and ±10% horizontal reducing the need for mechanical alignment (HUD)
- Support for pixel doubling or quadrupling to allow low resolution video input
- Gamma correction
- Embedded processor with error correction (ECC)
- On-chip diagnostic and self-test capability
- System diagnostics including temperature monitoring, device interface monitoring, and photodiode monitoring
- Integrated Management of Smooth Dimming
- Configurable GPIO
- No external RAM required, internal SRAM for image processing
- 600-MHz Sub-LVDS DMD interface for low power and emission
- Spread spectrum clocking for reduced EMI
- Video input interface
- Single Open LDI (FPD-Link I) port up to 110 MHz
- 24-bit RGB parallel interface up to 110...
