Datasheet4U Logo Datasheet4U.com

DRV8808 - Combination Motor Driver

General Description

The DRV8808 device provides the integrated motor driver solution for printers.

The chip has three full Hbridges and three buck DC-DC converters.

The output driver block for each consists of Nchannel power MOSFETs configured as full Hbridges to drive the motor windings.

Key Features

  • 1 Three DC Motor Drivers.
  • Up to 2.5-A Current Chopping.
  • Low Typical ON Resistance (RDSON = 0.5 Ω at TJ = 25°C).
  • Three Integrated DC-DC Converters.
  • ON/OFF Selectable Using.

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
DRV8800 DMOS Full-Bridge Motor Drivers
DRV8801 DMOS Full-Bridge Motor Drivers
DRV8801-Q1 DMOS Full-Bridge Motor Driver
DRV8801A-Q1 DMOS Full-Bridge Motor Driver
DRV8802 DC Motor Driver
DRV8802-Q1 Automotive DC Motor-Driver
DRV8803 Quad Low-Side Driver
DRV8804 Quad Serial Interface Low-Side Driver
DRV8805 Unipolar Stepper Motor Driver
DRV8806 Quad Serial Interface Low-Side Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community DRV8808 SLVS857B – DECEMBER 2009 – REVISED JANUARY 2015 DRV8808 Combination Motor Driver With DC-DC Converter 1 Features •1 Three DC Motor Drivers – Up to 2.5-A Current Chopping – Low Typical ON Resistance (RDSON = 0.5 Ω at TJ = 25°C) • Three Integrated DC-DC Converters – ON/OFF Selectable Using CSELECT Pin and Serial Interface – Outputs Configurable With External Resistor Network From 1 V to 90% of VM Capability for All Three Channels – 1.35-A Output Capability for All Three Channels • One Integrated LDO Regulator – Output Configurable With External Resistor Network from 1 V to 2.