Datasheet4U Logo Datasheet4U.com

DS90LV011AH - High Temperature 3-V LVDS Differential Driver

General Description

The DS90LV011AH is an LVDS driver optimized for high data rate and low power applications.

The DS90LV011AH is a current mode driver allowing power dissipation to remain low even at high frequency.

In addition, the short circuit fault current is also minimized.

Key Features

  • 40°C to 125°C operating temperature range.
  • Conforms to TIA/EIA-644-A standard.
  • >400-Mbps (200-MHz) switching rates.
  • 700-ps (100-ps typical) maximum differential skew.
  • 1.5-ns maximum propagation delay.
  • Single 3.3-V power supply.
  • ±350-mV differential signaling.
  • Power off protection (outputs in TRI-STATE).
  • Pinout simplifies PCB layout.
  • Low power dissipation (23 mW at 3.3 V typical).
  • 5-Pin SO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS90LV011A 3V LVDS Single High Speed Differential Driver National Semiconductor
DS90LV012A 3V LVDS Single CMOS Differential Line Receiver National Semiconductor
DS90LV017 LVDS Single High Speed Differential Driver National Semiconductor
DS90LV017A LVDS Single High Speed Differential Driver National Semiconductor
DS90LV018A 3V LVDS Single CMOS Differential Line Receiver National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
DS90LV011A 3V LVDS Single High Speed Differential Driver
DS90LV011AQ Automotive LVDS Differential Driver
DS90LV012A 3V LVDS Single CMOS Differential Line Receiver
DS90LV017A LVDS Single High Speed Differential Driver
DS90LV018A 3V LVDS Single CMOS Differential Line Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS90LV011AH SNLS198C – SEPTEMBER 2005 – REVISED JULY 2021 DS90LV011AH High Temperature 3-V LVDS Differential Driver 1 Features • –40°C to 125°C operating temperature range • Conforms to TIA/EIA-644-A standard • >400-Mbps (200-MHz) switching rates • 700-ps (100-ps typical) maximum differential skew • 1.5-ns maximum propagation delay • Single 3.3-V power supply • ±350-mV differential signaling • Power off protection (outputs in TRI-STATE) • Pinout simplifies PCB layout • Low power dissipation (23 mW at 3.