F28M36H33C2 Datasheet | Texas Instruments

es - Master Subsystem - ARM® Cortex®-M3 - 125 MHz - Embedded Memory - Up to 1MB of Flash (ECC) - Up to 128KB of RAM (ECC or Parity) - Up to 64KB of Shared RAM - 2KB of IPC Message RAM - Five Universal Asynchronous Receiver/Transmitters (UARTs) - Four Synchronous Serial Interfaces (SSIs) and a Serial Peripheral Interface (SPI) - Two Inter-integrated Circuits (I2Cs) - Universal Serial Bus On-the-Go (USB-OTG) + PHY - 10/100 ENET 1588 MII - Two Controller Area Network, D_CAN, Modules (Pin-Bootable) - 32-Channel Micro Direct Memory Access (µDMA) - Dual Security Zones (128-Bit Password per Zone) - External Peripheral Interface (EPI) - Micro Cyclic Redundancy Check (µCRC) Module - Four General-Purpose Timers - Two Watchdog Timer Modules - Endianness: Little Endian - Clocking - On-chip Crystal Oscillator and External Clock Input - Dynamic Phase-Locked Loop (PLL) Ratio Changes Supported - 1.2-V Digital, 1.8-V Analog, 3.3-V I/O Design - Interprocessor munications (IPC) - 32 Handshaking Channels - Four Channels Generate IPC Interrupts - Can be Used to Coordinate Transfer of Data Through IPC Message RAMs - Up to 142 Individually Programmable, Multiplexed General-Purpose Input/Output (GPIO) Pins - Glitch-free I/Os - Control Subsystem - TMS320C28x 32-Bit CPU - 150 MHz - C28x Core Hardware Built-in Self-Test - Embedded Memory - Up to 512KB of Flash...