Datasheet4U Logo Datasheet4U.com

LM5050-2 - FET Controller

General Description

The LM5050-2 High Side OR-ing FET Controller operates in conjunction with an external MOSFET as an ideal diode rectifier when connected in series with a power source.

Key Features

  • 1.
  • 2 Wide Operating Input Voltage Range: +6V to +75V.
  • +100 Volt Transient Capability.
  • Charge Pump Gate Driver for External N- Channel MOSFET.
  • MOSFET Diagnostic Test Mode.
  • Fast 50ns Response to Current Reversal.
  • 2A Peak Gate Turn-off Current.
  • Minimum VDS Clamp for Faster Turn-off.
  • Package: SOT-6 (Thin SOT23-6).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM50 SOT-23 Single-Supply Centigrade Temperature Sensor National Semiconductor
LM5000 Regulator National Semiconductor
LM5000EP Regulator National Semiconductor
LM5001 Regulator National Semiconductor
LM5002 Regulator National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM5050-1 FET Controller
LM5050-1-Q1 FET Controller
LM5051 Low Side OR-ing FET Controller
LM5056 High-Voltage System Power Management
LM5056A High-Voltage System Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM5050-2 www.ti.com SNVS679B – NOVEMBER 2010 – REVISED MARCH 2013 LM5050-2 High Side OR-ing FET Controller Check for Samples: LM5050-2 FEATURES 1 •2 Wide Operating Input Voltage Range: +6V to +75V • +100 Volt Transient Capability • Charge Pump Gate Driver for External N- Channel MOSFET • MOSFET Diagnostic Test Mode • Fast 50ns Response to Current Reversal • 2A Peak Gate Turn-off Current • Minimum VDS Clamp for Faster Turn-off • Package: SOT-6 (Thin SOT23-6) APPLICATIONS • Active OR-ing of Redundant (N+1) Power Supplies DESCRIPTION The LM5050-2 High Side OR-ing FET Controller operates in conjunction with an external MOSFET as an ideal diode rectifier when connected in series with a power source.