LM6154 Datasheet | Texas Instruments

Features - 1 At VS = 5V, typical unless noted. - Greater than Rail-to-rail Input CMVR - 0.2 5V to 5.25 V - Rail-to-rail Output Swing 0.01 V to 4.99 V - Wide Gain-bandwidth 75 MHz @ 100 k Hz - Slew Rate - Small Signal 5 V/µs - Large Signal 45 V/µs - Low Supply Current 1.4 m A/amplifier - Wide Supply Range 2.7 V to 24 V - Fast Settling Time of 1.1 µs for 2 V Step (to 0.01%) - PSRR 91 d B - CMRR 84 d B 2 Applications - Portable High Speed Instrumentation - Signal Conditioning Amplifier/ADC Buffers - Barcode Scanners 3 Description Using patented circuit topologies, the LM6152/LM6154 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made promise necessary. With only 1.4 m A/amplifier supply current, the 75 MHz gain bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The slew rate of the devices increases with increasing input differential voltage, thus allowing the device to handle capacitive loads while maintaining large signal amplitude. The LM6152/LM6154 can be driven by voltages that exceed both power supply rails, thus eliminating concerns about exceeding the mon-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. Operating on supplies from 2.7 V to over 24 V, the LM6152/LM6154 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) LM6152 SOIC (8) 4.902 mm × 3.912 mm SOIC (14) 8.636 mm × 3.912 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. Supply Current vs. Supply Voltage Offset Voltage vs. Supply voltage An IMPORTANT NOTICE at the end of this data sheet addresses availability,...