Datasheet4U Logo Datasheet4U.com

LM9076Q - 150mA Ultra-Low Quiescent Current LDO Regulator

General Description

The LM9076Q is a ±3%, 150 mA logic controlled voltage regulator.

Key Features

  • 1.
  • 2 AEC-Q100 Grade1 Qualified (-40°C to +125°C).
  • Available with 5.0V or 3.3V Output Voltage.
  • Ultra Low Ground Pin Current, 25 μA Typical for 100 μA Load.
  • VOUT Initial Accuracy of ±1.5%.
  • VOUT Accurate to ±3% Over Load and Temperature Conditions.
  • Low Dropout Voltage, 200 mV Typical with 150 mA Load.
  • Low Off State Ground Pin Current for LM9076QBMA.
  • Delayed RESET Output Pin for Low VOUT Detection.
  • +70V/-50V Voltage Tran.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM9076 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM9076 150mA Ultra-Low Quiescent Current LDO Regulator
LM9070 Low-Dropout System Voltage Regulator
LM9071 Low-Dropout System Voltage Regulator
LM90 Remote Diode and Local Digital Temperature Sensor
LM9036 Ultra-Low Quiescent Current Voltage Regulator
LM9036Q Ultra-Low Quiescent Current Voltage Regulator
LM9044 Lambda Sensor Interface Amplifier
LM9061 High-Side Protection Controller
LM9061-Q1 High-Side Protection Controller
LM92 Sign Temperature Sensor and Thermal Window Comparator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM9076Q www.ti.com SNVS713B – APRIL 2011 – REVISED MARCH 2013 LM9076Q 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output Check for Samples: LM9076Q FEATURES 1 •2 AEC-Q100 Grade1 Qualified (-40°C to +125°C) • Available with 5.0V or 3.3V Output Voltage • Ultra Low Ground Pin Current, 25 μA Typical for 100 μA Load • VOUT Initial Accuracy of ±1.5% • VOUT Accurate to ±3% Over Load and Temperature Conditions • Low Dropout Voltage, 200 mV Typical with 150 mA Load • Low Off State Ground Pin Current for LM9076QBMA • Delayed RESET Output Pin for Low VOUT Detection • +70V/-50V Voltage Transients • Operational VIN up to +40V DESCRIPTION The LM9076Q is a ±3%, 150 mA logic controlled voltage regulator.