MSP430FR5041 Datasheet | Texas Instruments

ures - Best-in-class ultrasonic water and gas flow measurement with ultra-low power consumption - Water - ±12.5-ps differential time of flight (d To F) accuracy at low to high flow rates and across operating temperature - Achieves ±1% accuracy for a wide dynamic range of 500:1 - Ability to measure a maximum flow rate of 8800 liters/hour (40 gallons/minute) on 25‑mm diameter pipe - Ability to detect a minimum flow rate of <1 liter/hour (0.005 gallons/minute) - High-precision time measurement resolution of <5 ps - Approximately 3-µA overall current consumption with 1 set of results per second - Ability to support a wide pipe sizes with 15‑mm to 1000-mm diameter - Gas - ±250-ps differential time of flight (d To F) accuracy at low to high flow rates and across operating temperature - Achieves ±1% accuracy up to 12000 liters/hour with a wide dynamic range of 200:1 - Ability to measure a flow rate >25000 liters/hour - Ability to detect a minimum flow rate of <3 liters/hour - High-precision time measurement resolution of <100 ps - Approximately 20-µA overall current consumption with 1 set of results per second - pliant to and exceeds ISO4064, OIML R49, EN 14236 and EN 1434 accuracy standards - Ability to directly interface standard ultrasonic sensors (up to 2.5 MHz) - Integrated analog front end - Ultrasonic Sensing Solution (USS_A) that includes - Programmable pulse generator (PPG) to generate multi-tone pulses at various frequencies - Integrated PHY with low-impedance output driver (4 Ω) to control input and output channels - High-performance high-speed 12-bit analog-todigital converter (SDHS) with output data rates up to 8 Msps - Programmable gain amplifier (PGA) with - 6.5 d B to 30.8 d B - High-performance PLL with output range of 68 to 80 MHz - Metering test interface (MTIF) - Pulse generator and pulse counter - Pulse rates up to 1024 pulses per second...