Texas Instruments OPA607
The OPA607 and OPA2607 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifier with low noise of 3.8 nV/√ Hz and a GBW of 50 MHz. The low noise and wide bandwidth of the OPAx607 devices make them attractive for general-purpose applications which require a good balance between cost and performance. The high-impedance CMOS inputs make the OPAx607 devices an ideal amplifier to interface with sensors with high output impedance (for example, piezoelectric transducers).| Part No. | OPA607 |
|---|---|
| Datasheet | OPA607 Download |
| Manufacturer |  Texas Instruments |
| Description | CMOS Operational Amplifier |
| Buy | Stock & Price |
FEATURES
● Gain Bandwidth Product (GBW): 50 MHz● Quiescent Current: 900 µA (Typical)
● Broadband Noise: 3.8 nV/√Hz
● Input Offset Drift: 1.5 μV/°C (Maximum)
● Offset Voltage: 120 µV (Typical)
● Input Bias Current: 10 pA (Maximum)
● Rail-to-Rail Output (RRO)
● Decompensated, Gain ≥ 6 V/V (Stable)
● Power Down Current: 1 µA (Maximum)
● Supply Range: 2.2 V to 5.5 V 2
APPLICATIONS
● Current-Sensing● Fish Finders and Sonar
● Ultrasonic Flow Meters
● Garden and Power Tools
● Printers
● Light Curtains and Safety Guards
● Optical Modules
● Handheld Test Equipment
● PM2.5 and PM10 Particle Sensors RSH LOAD RG ISH RG RF VS+ ± OPA607 + VTH REXT CEXT Short Circuit Detection ± TLV3201 + VS+ ADS7042 3
DESCRIPTION
The OPAx607 devices feature a Power Down mode with a maximum quiescent current of less than 1 µA, making the device suitable for use in portable batterypowered applications. The rail-to-rail output (RRO) of the OPAx607 devices can swing up to 8 mV from the supply rails, maximizing dynamic range.
