SN54AC14-SP Datasheet | Texas Instruments

FEATURES - 2-V to 6-V VCC Operation - Inputs Accept Voltages to 6 V - Max tpd of 9.5 ns at 5 V - Rad-Tolerant: 50 k Rad(Si) TID (1) - TID Dose Rate < 2m Rad/sec - QML-V Qualified, SMD 5962-87624 (1) Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available contact factory for details. J OR W PACKAGE (TOP VIEW) 1A 1 1Y 2 2A 3 2Y 4 3A 5 3Y 6 GND 7 14 VCC 13 6A 12 6Y 11 5A 10 5Y 9 4A 8 4Y DESCRIPTION /ORDERING INFORMATION These Schmitt-trigger devices contain six independent inverters. They perform the Boolean function Y = A. Because of the Schmitt action, they have different input threshold levels for positive-going (VT+) and for negativegoing (VT- ) signals. These circuits are temperature pensated and can be triggered from the slowest of input ramps and still give clean, jitter-free output signals. They also have a greater noise margin than conventional inverters. - 55°C to 125°C CDIP - J CFP - W ORDERING INFORMATION(1) PACKAGE (2) ORDERABLE PART NUMBER Tube 5962-8762402VCA Tube 5962-8762402VDA TOP-SIDE MARKING 5962-8762402VCA 5962-8762402VDA (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at .ti.. (2) Package drawings, thermal data, and symbolization are available at .ti./packaging. FUNCTION TABLE (EACH INVERTER) INPUT A OUTPUT Y LOGIC DIAGRAM, EACH INVERTER (POSITIVE...