Datasheet4U Logo Datasheet4U.com

SN54LV4066A - QUADRUPLE BILATERAL ANALOG SWITCHES

Description

This quadruple silicon-gate CMOS analog switch is designed for 2-V to 5.5-V VCC operation.

These switches are designed to handle both analog and digital signals.

Each switch permits signals with amplitudes up to 5.5 V (peak) to be transmitted in either direction.

📥 Download Datasheet

📁 Similar Datasheet

  • SN54LS00 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS01 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS02 - QUAD 2-INPUT NOR GATE (Motorola Inc)
  • SN54LS03 - QUAD 2-INPUT NAND GATE (Motorola Inc)
  • SN54LS04 - HEX INVERTER (Motorola Inc)
  • SN54LS05 - HEX INVERTER (Motorola Inc)
  • SN54LS08 - QUAD 2-INPUT AND GATE (Motorola Inc)
  • SN54LS09 - QUAD 2-INPUT AND GATE (Motorola Inc)
  • SN54LS10 - TRIPLE 3-INPUT NAND GATE (Motorola Inc)
  • SN54LS107A - DUAL JK NEGATIVE EDGE-TRIGGERED FLIP-FLOP (Motorola Inc)
Other Datasheets by Texas Instruments
  • SN54LV4040A - 12-BIT ASYNCHRONOUS BINARY COUNTER
  • SN54LV4052A - DUAL 4-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS
  • SN54LV4053A - TRIPLE 2-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS
  • SN54LV00A - Quadruple 2-Input Positive-NAND Gates
  • SN54LV02A - Quadruple 2-Input Positive-NOR Gates
  • SN54LV06A - Hex Inverter Buffers/Drivers
  • SN54LV10A - TRIPLE 3-INPUT POSITIVE-NAND GATE
  • SN54LV11A - TRIPLE 3-INPUT POSITIVE-AND GATES

Full PDF Text Transcription

Click to expand full text
SN54LV4066A, SN74LV4066A QUADRUPLE BILATERAL ANALOG SWITCHES D 2-V to 5.5-V VCC Operation D Support Mixed-Mode Voltage Operation on All Ports D High On-Off Output-Voltage Ratio D Low Crosstalk Between Switches D Individual Switch Controls D Extremely Low Input Current D ESD Protection Exceeds JESD 22 − 2000-V Human-Body Model (A114-A) − 200-V Machine Model (A115-A) − 1000-V Charged-Device Model (C101) description/ordering information This quadruple silicon-gate CMOS analog switch is designed for 2-V to 5.5-V VCC operation. These switches are designed to handle both analog and digital signals. Each switch permits signals with amplitudes up to 5.5 V (peak) to be transmitted in either direction. Each switch section has its own enable-input control (C).
Published: |