Datasheet4U Logo Datasheet4U.com

SN65HVD10-EP - 3.3V RS-485 TRANSCEIVERS

General Description

The SN65HVD10, SN65HVD11, and SN65HVD12 combine a 3-state differential line driver and differential input line receiver that operate with a single 3.3 V power supply.

Key Features

  • 1.
  • Controlled Baseline.
  • One Assembly/Test Site.
  • One Fabrication Site.
  • Extended Temperature Performance of Up to.
  • 40°C to 125°C and.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product-Change Notification.
  • Qualification Pedigree (1).
  • Operates With a 3.3 V Supply.
  • Bus-Pin ESD Protection Exceeds 16 kV HBM.
  • 1/8 Unit-Load Option Available (Up to 256 Nodes on.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN65004 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65007 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65010 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65012 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65016 One Channel Direct Drive Speech Controller SONiX Technology Company

Other Datasheets by Texas Instruments

Part Number Description
SN65HVD10 3.3-V RS-485 Transceivers
SN65HVD101 IO-Link PHY
SN65HVD102 IO-Link PHY
SN65HVD1040 Low-Power CAN Bus Transceiver
SN65HVD1040-HT LOW-POWER CAN TRANSCEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN65HVD10-EP, SN65HVD11-EP SN65HVD12-EP SGLS278E – DECEMBER 2004 – REVISED SEPTEMBER 2007 3.3 V RS-485 TRANSCEIVERS FEATURES 1 • Controlled Baseline – One Assembly/Test Site – One Fabrication Site • Extended Temperature Performance of Up to –40°C to 125°C and –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Operates With a 3.3 V Supply • Bus-Pin ESD Protection Exceeds 16 kV HBM • 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus) • Optional Driver Output Transition Times for Signaling Rates of 1 Mbps, 10 Mbps, and 25 Mbps (2) • Meets or Exceeds the Requirements of ANSI TIA/EIA-485-A • Bus-Pin Short Circuit Protection From –7 V to 12 V • Low-Current Standby Mode . . .