SN65HVD12-EP Datasheet | Texas Instruments

URES - Controlled Baseline - One Assembly/Test Site - One Fabrication Site - Extended Temperature Performance of Up to - 40°C to 125°C and - 55°C to 125°C - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product-Change Notification - Qualification Pedigree (1) - Operates With a 3.3 V Supply - Bus-Pin ESD Protection Exceeds 16 k V HBM - 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus) - Optional Driver Output Transition Times for Signaling Rates of 1 Mbps, 10 Mbps, and 25 Mbps (2) - Meets or Exceeds the Requirements of ANSI TIA/EIA-485-A - Bus-Pin Short Circuit Protection From - 7 V to 12 V - Low-Current Standby Mode . . . 1 μA (Typ) - Open-Circuit, Idle-Bus, and Shorted-Bus Failsafe Receiver - Thermal Shutdown Protection - Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications - SN75176 Footprint (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits. (2) The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second). APPLICATIONS - Digital Motor Control - Utility Meters - Chassis-to-Chassis Interconnects - Electronic Security Stations - Industrial Process...