Datasheet4U Logo Datasheet4U.com

SN65LVDS108 - 8-PORT LVDS REPEATER

General Description

The SN65LVDS108 is configured as one differential line receiver connected to eight differential line drivers.

Individual output enables are provided for each output and an additional enable is provided for all outputs.

Key Features

  • One Line Receiver and Eight Line Drivers Configured as an 8-Port LVDS Repeater.
  • Line Receiver and Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard.
  • Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz.
  • Enabling Logic Allows Individual Control of Each Driver Output, Plus All Outputs.
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load.
  • Electrically Compatible W.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN65004 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65007 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65010 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65012 One Channel Direct Drive Speech Controller SONiX Technology Company
SN65016 One Channel Direct Drive Speech Controller SONiX Technology Company

Other Datasheets by Texas Instruments

Part Number Description
SN65LVDS100 Differential Translator/Repeater
SN65LVDS101 Differential Translator/Repeater
SN65LVDS104 4-Port LVDS and 4-Port TTL-to-LVDS Repeaters
SN65LVDS105 4-Port LVDS and 4-Port TTL-to-LVDS Repeaters
SN65LVDS1050 HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN65LVDS108 www.ti.com SLLS399E – NOVEMBER 1999 – REVISED FEBRUARY 2005 8-PORT LVDS REPEATER FEATURES • One Line Receiver and Eight Line Drivers Configured as an 8-Port LVDS Repeater • Line Receiver and Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard • Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz • Enabling Logic Allows Individual Control of Each Driver Output, Plus All Outputs • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load • Electrically Compatible With LVDS, PECL, LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT, SSTL, or HSTL Outputs With External Termination Networks • Propagation Delay Times < 4.7 ns • Output Skew Less Than 300 ps and Part-to-Part Skew Less Than 1.