SN74ACT374 Datasheet | Texas Instruments

Features - Operation of 4.5V to 5.5V VCC - Inputs accept voltages to 5.5V - Max tpd of 10ns at 5V - Inputs are TTL-voltage patible 2 Description These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. PART NUMBER SNx4ACT374 Device Information PACKAGE(1) PACKAGE SIZE(2) BODY SIZE(3) DB (SSOP, 20) 7.2mm x 7.8mm 7.20mm × 5.30mm DW (SOIC, 20) 12.80mm x 10.3mm 12.80mm × 7.50mm N (PDIP, 20) 24.33mm x 9.4mm 24.33mm × 6.35mm NS (SO, 20) 12.6mm x 7.8mm 12.60mm × 5.30mm PW (TSSOP, 20) 6.50mm x 6.4mm 6.50mm × 4.40mm (1) For more information, see Section 10. (2) The package size (length × width) is a nominal value and includes pins, where applicable. (3) The body size (length × width) is a nominal value and does not include pins. An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SN54ACT374, SN74ACT374 SCAS539H - OCTOBER 1995 - REVISED MARCH 2024 .ti. Table of Contents 1 Features 1 2 Description 1 3 Pin Configuration and Functions 3 4 Specifications 4 4.1 Absolute Maximum Ratings 4 4.2 Remended Operating Conditions 4 4.3 Thermal Information 5 4.4 Electrical Characteristics 5 4.5 Timing Requirements 6 4.6 Switching Characteristics...