SN74AHC245-EP
SN74AHC245-EP is Octal Bus Transceivers manufactured by Texas Instruments.
D Controlled Baseline
- One Assembly/Test Site, One Fabrication
Site
D Extended Temperature Performance of
- 55°C to 125°C
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification D Qualification Pedigree† D Operating Range 2-V to 5.5-V VCC D Latch-Up Performance Exceeds 250 m A Per
JESD 17
D ESD Protection Exceeds 1000 V Per
MIL-STD-833, Method 3015; Exceeds 100 V
Using Machine Model (C = 200 p F, R = 0)
† ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits.
SN74AHC245-EP OCTAL BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCLS487A
- MAY 2003
- REVISED JUNE 2003
DW OR PW PACKAGE (TOP VIEW)
DIR A1 A2 A3 A4 A5 A6 A7 A8
1 2 3 4 5 6 7 8 9 10
20 VCC 19 OE 18 B1 17 B2 16 B3 15 B4 14 B5 13 B6 12 B7 11 B8 description/ordering information
The SN74AHC245 octal bus transceiver is designed for asynchronous two-way munication between data buses. The control-function implementation minimizes external timing requirements.
This device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses effectively are isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
PACKAGE‡
ORDERABLE PART NUMBER
TOP-SIDE...
