SN74AUP1T34-Q1 Datasheet | Texas Instruments

Features - 1 Qualified for Automotive Applications - AEC-Q100 Qualified - Device Temperature Grade 1: - 40°C to 125°C Ambient Operating Temperature - Device HBM ESD Classification Level 3A - Device CDM ESD Classification Level C5 - Wide Operating VCC Range of 0.9 V to 3.6 V - Balanced Propagation Delays: t PLH = t PHL (1.8-V to 3.3-V Translation Typical) - Low Static-Power Consumption: Maximum of 5-µA - ±6-m A Output Drive at 3 V - Ioff Supports Partial Power-Down-Mode Operation - VCC Isolation Feature - If VCCA Input Is at GND, B Port Is in the High-Impedance state - Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at Input - ESD Protection Exceeds JESD 22 - 5000-V Human-Body Model (AEC-Q100-002-E) - Latch-Up Performance Meets 100 m A Per Q100-004-D 2 Applications - Automotive - Enterprise - Industrial - Personal Electronics - Telemunications 3 Description The SN74AUP1T34-Q1 device is a 1-bit noninverting translator that uses two separate configurable powersupply rails. It is a unidirectional translator from A to B. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts supply voltages from 0.9 V to 3.6 V. This allows for low-voltage translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. The SN74AUP1T34-Q1 is also fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if VCCA input is at GND, the B port is in the high-impedance state. If VCCB input is at GND, any input to the A side does not cause the leakage current even floating. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SN74AUP1T34-Q1 SC70 (5) 2.00 mm × 1.25 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Example Application...