Datasheet4U Logo Datasheet4U.com

SN74AVC4T234 Datasheet 4-bit Dual-supply Unidirectional Noninverting Voltage Translator

Manufacturer: Texas Instruments

Overview: www.ti.com SN74AVC4T234 SCES810B – JUNE 2011 – RSENV7IS4EADVJCUL4YT2203240 SCES810B – JUNE 2011 – REVISED JULY 2020 SN74AVC4T234 4-Bit Dual-Supply Unidirectional Noninverting Voltage Translator.

General Description

This 4-bit non-inverting bus transceiver uses two separate configurable power-supply rails to enable asynchronous communication between B-port inputs and A-port outputs.

The A port is designed to track VCCA while the B port is designed to track VCCB.

Both VCCA and VCCB are configurable from 0.9 V to 3.6 V.

Key Features

  • Wide operating VCC range of 0.9 V to 3.6 V.
  • 3.6-V I/O Tolerant to support mixed-mode signal operation.
  • Max tpd of 3.7 ns at 3.3 V.
  • Balanced propagation delays: tPLH = tPHL.
  • Low static-power consumption, 5-μA Max ICC.
  • Outputs disabled if either VCC goes to 0V.
  • ±3-mA Output drive at 1.8 V.
  • 26-Ω series resistor on A-side outputs.
  • Ioff supports partial power-down-mode operation.
  • Input hysteresis allows slow in.

More Datasheets from Texas Instruments

Part Number Description
SN74AVC4T245 Dual-Bit Bus Transceiver
SN74AVC4T245-Q1 4-Bit Dual-Supply Bus Transceiver
SN74AVC4T774 4-Bit Dual-Supply Bus Transceiver
SN74AVC16244 16-BIT BUFFER/DRIVER
SN74AVC16245 16-BIT BUS TRANSCEIVER
SN74AVC16334 16-BIT UNIVERSAL BUS DRIVER
SN74AVC16373 16-BIT TRANSPARENT D-TYPE LATCH
SN74AVC16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74AVC16646 16-BIT BUS TRANSCEIVER/REGISTER
SN74AVC16722 22-BIT FLIP-FLOP

SN74AVC4T234 Distributor