SN74CBTLV1G125-Q1
SN74CBTLV1G125-Q1 is LOW-VOLTAGE SINGLE FET BUS SWITCH manufactured by Texas Instruments.
Features
- 1 AEC-Q100 Qualified for Automotive Applications
- Device Temperature Grade 1:
- 40°C to +125°C, TA
- 5-Ω Switch Connection Between Two Ports
- Rail-to-Rail Switching on Data I/O Ports
- Ioff Supports Partial-Power-Down Mode Operation
2 Applications
- Ventilator
3 Description
The SN74CBTLV1G125 features a single high-speed line switch. The switch is disabled when the outputenable (OE) input is high.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Device Information(1)
ORDER NUMBER PACKAGE
BODY SIZE
SOT-23 (DBV) (5)
2.90 mm × 1.60 mm
(1) For all available packages, see the orderable addendum at the end of the datasheet.
2.5 V
Application Schematic
C or System Logic
C VCC
To/From System
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
SCDS289B
- AUGUST 2009
- REVISED JANUARY 2019
.ti.
Table of Contents
1 Features
1 2 Applications 1 3 Description
1 4 Revision History 2 5 Pin Configuration and Functions 3 6 Specifications 4
6.1 Absolute Maximum Ratings 4 6.2 ESD Ratings...
