SN74CBTLV1G125
SN74CBTLV1G125 is LOW-VOLTAGE SINGLE FET BUS SWITCH manufactured by Texas Instruments.
FEATURES
- 5-Ω Switch Connection Between Two Ports
- Rail-to-Rail Switching on Data I/O Ports
- Ioff Supports Partial-Power-Down Mode Operation
DBV PACKAGE (TOP VIEW)
DCK PACKAGE (TOP VIEW)
4B
See mechanical drawings for dimensions.
DESCRIPTION
/ORDERING INFORMATION
The SN74CBTLV1G125 features a single high-speed line switch. The switch is disabled when the output-enable (OE) input is high.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
- 40°C to 85°C
ORDERING INFORMATION
PACKAGE (1)
ORDERABLE PART NUMBER
SOT (SOT-23)
- DBV Reel of 3000 SN74CBTLV1G125DBVR
SOT (SC-70)
- DCK Reel of 3000 SN74CBTLV1G125DCKR
TOP-SIDE MARKING(2) V25_ VM_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package.
(2) The actual top-side marking has one additional character that designates the assembly/test site.
FUNCTION TABLE
INPUT OE
FUNCTION
A port = B port Disconnect
LOGIC DIAGRAM (POSITIVE LOGIC)
2 A
1 OE
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data...
