SN74LVC16T245-EP Datasheet | Texas Instruments

FEATURES - Control Inputs VIH and VIL Levels Are Referenced to VCCA Voltage - VCC Isolation Feature - If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State - Overvoltage-Tolerant Inputs and Outputs Allow Mixed-Voltage-Mode Data munications - Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.65-V to 5.5-V Power-Supply Range - Ioff Supports Partial-Power-Down Mode Operation - Latch-Up Performance Exceeds 100 m A Per JESD 78, Class II - ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS - Controlled Baseline - One Assembly and Test Site - One Fabrication Site - Available in Military (-55°C to 125°C) Temperature Ranges (1) - Extended Product Life Cycle - Extended Product-Change Notification - Product Traceability (1) Custom temperature ranges available DGG PACKAGE (TOP VIEW) 1DIR 1 1B1 2 1B2 3 GND 4 1B3 5 1B4 6 VCCB 7 1B5 8 1B6 9 GND 10 1B7 11 1B8 12 2B1 13 2B2 14 GND 15 2B3 16 2B4 17 VCCB 18 2B5 19 2B6 20 GND 21 2B7 22 2B8 23 2DIR 24 48 1OE 47 1A1 46 1A2 45 GND 44 1A3 43 1A4 42 VCCA 41 1A5 40 1A6 39 GND 38 1A7 37 1A8 36 2A1 35 2A2 34 GND 33 2A3 32 2A4 31 VCCA 30 2A5 29 2A6 28 GND 27 2A7 26 2A8 25 2OE DESCRIPTION This 16-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of...