SN74LVC16T245 Datasheet | Texas Instruments

Features - 1 Control Inputs VIH/VIL Levels are Referenced to VCCA Voltage - VCC Isolation Feature - If Either VCC Input is at GND, Both Ports are in the High-Impedance State - Overvoltage-Tolerant Inputs and Outputs Allow Mixed Voltage-Mode Data munications - Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.65-V to 5.5-V Power-Supply Range - Ioff Supports Partial-Power-Down Mode Operation - Latch-Up Performance Exceeds 100 m A Per JESD 78, Class II - ESD Protection Exceeds JESD 22 2 Applications - Personal Electronics - Industrial - Enterprise - Tele 3 Description This 16-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. The SN74LVC16T245 device is designed for asynchronous munication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TSSOP (48) 12.50 mm × 6.10 mm TVSOP (48) SSOP (48) 9.70 mm × 4.40 mm 15.88 mm × 7.49 mm BGA MICROSTAR JUNIOR (56) 7.00 mm × 4.50 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Logic Diagram (Positive Logic) 1 1DIR 24 2DIR 48 1OE 25 2OE 47 1A1 36 2A1 2 1B1 13...