Datasheet4U Logo Datasheet4U.com

SN74LVC1G32-EP - Single 2-Input Positive-OR Gate

General Description

This single 2-input positive-OR gate is designed for 1.65-V to 5.5-V VCC operation.

B in positive logic.

This device is fully specified for partial power-down applications using Ioff.

Key Features

  • Controlled Baseline.
  • One Assembly/Test Site, One Fabrication Site.
  • Extended Temperature Performance of.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product-Change Notification.
  • Qualification Pedigree (1).
  • Supports 5-V VCC Operation.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 3.6 ns at 3.3 V.
  • Low Power Consumption, 10 μA Max ICC.
  • ±24-mA Output Drive at.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G34 Single buffer UMW
SN74LVC1G125 high performance non-inverting buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC1G32-Q1 Single 2-Input Positive-OR Gate
SN74LVC1G32 Single 2-Input Positive-OR Gate
SN74LVC1G3208 Single 3-Input Positive OR-AND Gate
SN74LVC1G3208-EP Single 3-Input Positive OR-AND Gate
SN74LVC1G3208-Q1 Single 3-Input Positive OR-AND Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com FEATURES • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 3.6 ns at 3.3 V • Low Power Consumption, 10 μA Max ICC • ±24-mA Output Drive at 3.3 V (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life.