SN74LVTH16373-EP Datasheet | Texas Instruments

Features - 1 Controlled Baseline - One Assembly/Test Site, One Fabrication Site - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product-Change Notification - Qualification Pedigree (1) - Member of the Texas Instruments Widebus™ Family - State-of-the-Art Advanced Bi CMOS Technology (ABT) Design for 3.3-V Operation and Low Static Power Dissipation - Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) - Supports Unregulated Battery Operation Down to 2.7 V - Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C - Ioff and Power-Up Tri-State Support Hot Insertion - Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors - Distributed VCC and GND Pins Minimize High Speed Switching Noise - Flow-Through Architecture Optimizes PCB Layout - Latch-Up Performance Exceeds 500 m A Per JESD 17 - ESD Protection Exceeds JESD 22 - 4000-V Human Body Model (A114-A) - 200-V Machine Model (A115-A) 2 Applications - Data Buffer - Bus Driver - Display Driver 3 Description The SN74LVTH16373 is a 16-bit transparent D-type latch with tri-state outputs designed for low-voltage (3.3 V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. This device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. This device can be used as two 8-bit latches or one 16-bit latch. When the latchenable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. Device Information(2) PART NUMBER PACKAGE BODY SIZE (NOM) TSSOP (48) 12.50 mm × 6.10 mm SSOP (48) BGA MICROSTAR JUNIOR (56) 15.88 mm × 7.49 mm 4.50 mm × 7.00 mm (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to,...