SN75LVCP412CD Datasheet | Texas Instruments

FEATURES - Fully Integrated Cable Detect Feature pliant with SATA 2.6 Spec - Enables System Power Savings of up to 200m W When HDD is Not Detected at e SATA Connector - Low Device Power - <200m W (Typ) in Active Mode - <20m W (Typ) in Auto Low Power Mode - <2m W (Max) in Standby Mode - Supports mon Mode Biasing for OOB Signaling with Fast Turn-On - Channel Selectable Output Pre-Emphasis - Excellent Jitter and Loss pensation Capability to Over 20" FR4 Trace - High Protection Against ESD Transient - HBM: 8,000V - CDM: 1,500V - MM: 200V - 20 Pin QFN 4x4 Package - Pin patible to LVCP412/LVCP412A APPLICATIONS - Notebooks, Desktops, Docking Stations, Servers and Workstations DESCRIPTION The SN75LVCP412CD is a dual channel, single lane SATA redriver and signal conditioner supporting data rates up to 3.0Gbps that plies with SATA spec revision 2.6. The SN75LVCP412CD operates from a single 3.3V supply. Integrated 100-Ω line termination and self-biasing make the device suitable for AC coupling. The inputs incorporate an OOB detector which automatically turns the differential outputs off while maintaining a stable output mon-mode voltage pliant to SATA link. The device is also designed to handle SSC transmission per SATA spec. The SN75LVCP412CD handles interconnect losses at both its input and output. The built-in transmitter pre-emphasis feature is capable of applying 0d B or 2.5d B of relative amplification at higher frequencies to counter the expected interconnect loss. On the receive side the device applies a fixed equalization of 7d B to boost input frequencies near 1.5GHz. Collectively, the input equalization and output pre-emphasis features of the device works to fully restore SATA signal integrity over extended cable and backplane pathways. The device is hot-plug capable(1) preventing device damage under device hot-insertion such as async signal plug/removal, un-powered plug/removal, powered plug/removal or surprise plug/removal. (1) Requires use of AC coupling...