SN75LVCP600S Datasheet | Texas Instruments

FEATURES - Single 3.3 V supply - Suitable to receive 6.0 Gbps data over up to >40 inches (1.0 meter) of FR4 PC board - Two-level RX and TX Equalization - RX→ 7, 15d B - TX→ 0, - 1.3d B - Pin-selectable SATA/SAS signaling - Programmable squelch threshold for long channels - Low active power and partial/slumber state support - 106m W TYP (Active Mode @6Gbps) - <11m W (when link in partial/slumber state) - Ultra-small package for optimal placement - - 10-pad 2.5mm x 2.5mm QFN - High ESD-transient protection - HBM: 9,000V - CDM: 1,500V - MM: 200V APPLICATIONS - Notebook and desktop PCs, docking stations, active cable, servers, workstations DESCRIPTION The SN75LVCP600S is a single channel SATA/SAS signal conditioner supporting data rates up to 6.0Gbps. The device plies with SATA physical spec rev 3.0 and SAS electrical spec 2.0 SN75LVCP600S operates from a single 3.3V supply and has 100Ω line termination with self-biasing feature , making the device suitable for AC coupling. The inputs incorporate an OOB (out-of-band) detector, which automatically squelch the output while maintaining a stable mon mode voltage pliant to SATA/SAS link. RX+ [3] RX- [4] Equalizer (1) GND[6] Vcc[2] VBB = 1.7 V TYP LVCP 600S Driver TX+ [8] TX- [7] OOB Detect The SN75LVCP600S handles interconnect losses at its input with selectable equalization settings that can be programmed to match loss in the channel. For data rates of 3Gbps and lower the LVCP600S equalizes signals for a span of up to 50 inches of FR4 board material. For data rates of 6Gbps, the device pensates > 40 inches of FR4 material. Rx/Tx equalization level is controlled by the setting of signal control pins EQ and DE. CTRL MODE DE EQ SQ_TH [1] [9] [5] [10] Figure 1. Data Flow Block...