TLV2771 Datasheet | Texas Instruments

TLV277x, TLV277x A FAMILY OF 2.7ĆV HIGHĆSLEWĆRATE RAILĆTOĆRAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN SLOS209G - JANUARY 1998 - REVISED FEBRUARY 2004 D High Slew Rate . . . 10.5 V/µs Typ D High-Gain Bandwidth . . . 5.1 MHz Typ D Supply Voltage Range 2.5 V to 5.5 V D Rail-to-Rail Output D 360 µV Input Offset Voltage D Low Distortion Driving 600-Ω 0.005% THD+N D 1 m A Supply Current (Per Channel) D 17 n V/√Hz Input Noise Voltage D 2 p A Input Bias Current D Characterized From TA = - 55°C to 125°C D Available in MSOP and SOT-23 Packages D Micropower Shutdown Mode . . . IDD < 1 µA D Available in Q-Temp Automotive High Reliability Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards description The TLV277x CMOS operational amplifier family bines high slew rate and bandwidth, rail-to-rail output swing, high output drive, and excellent dc precision. The device provides 10.5 V/µs of slew rate and 5.1 MHz of bandwidth while only consuming 1 m A of supply current per channel. This ac performance is much higher than current petitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices also have low distortion while driving a 600-Ω load for use in tele systems. These amplifiers have a 360-µV input offset voltage, a 17 n V/√Hz input noise voltage, and a 2-p A input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range (- 40°C to 125°C), making it useful for automotive systems, and the military temperature range (- 55°C to 125°C), for military systems. These devices operate from a 2.5-V to 5.5-V single supply voltage and are characterized at 2.7 V and 5 V. The single-supply operation and low power consumption make these devices a good solution for portable applications. The following table lists the...