Datasheet4U Logo Datasheet4U.com

TLV61220 - Low-Input Voltage Step-Up Converter

General Description

The TLV61220 device provides a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or onecell Li-Ion or Li-polymer battery.

Possible output currents depend on the input-to-output voltage ratio.

Key Features

  • 1 Up to 95% Efficiency at Typical Operating Conditions.
  • 5.5-μA Quiescent Current.
  • Startup Into Load at 0.7-V Input Voltage.
  • Operating Input Voltage from 0.7 V to 5.5 V.
  • Pass-Through Function during Shutdown.
  • Minimum Switching Current 200 mA.
  • Protections:.
  • Output Overvoltage.
  • Overtemperature.
  • Input Undervoltage Lockout.
  • Adjustable Output Voltage from 1.8 V to 5.5 V.
  • Small 6-pin Thin SOT-23.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLV271 Operational Amplifier ON Semiconductor
TLV271 CMOS RAIL TO RAIL OUTPUT OPERATIONAL AMPLIFIERS Diodes
TLV272 Operational Amplifier ON Semiconductor
TLV272 CMOS RAIL TO RAIL OUTPUT OPERATIONAL AMPLIFIERS Diodes
TLV274 Operational Amplifier ON Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TLV61224 Single-Cell High-Efficient Step-Up Converter
TLV61225 Single-Cell High-Efficient Step-Up Converter
TLV61046A 28-V Output Voltage Boost Converter
TLV61047 2.2A Non-synchronous Boost Converter
TLV61048 14-V Output Voltage Non-synchronous Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TLV61220 SLVSB53A – MAY 2012 – REVISED DECEMBER 2014 TLV61220 Low-Input Voltage Step-Up Converter in Thin SOT-23 Package 1 Features •1 Up to 95% Efficiency at Typical Operating Conditions • 5.5-μA Quiescent Current • Startup Into Load at 0.7-V Input Voltage • Operating Input Voltage from 0.7 V to 5.5 V • Pass-Through Function during Shutdown • Minimum Switching Current 200 mA • Protections: – Output Overvoltage – Overtemperature – Input Undervoltage Lockout • Adjustable Output Voltage from 1.8 V to 5.