TP3067A Datasheet | Texas Instruments

description The TP3064A, TP3067A, TP13064A, and TP13067A are prised of a single-chip PCM codec (pulse-code-modulated encoder and decoder) and PCM line filter. These devices provide all the functions required to interface a full-duplex (2-wire) voice telephone circuit with a TDM (time-division-multiplexed) system. These devices are pin-for-pin patible with the National Semiconductor TP3064A and TP3067A, respectively. Primary applications include: - Line interface for digital transmission and switching of T1 carrier, PABX, and central office telephone systems - Subscriber line concentrators - Digital-encryption systems - Digital voice-band data-storage systems - Digital signal processing DW OR N PACKAGE (TOP VIEW) VPO+ 1 ANLG GND 2 - 3 VPI 4 VFRO 5 VCC 6 FSR 7 DR 8 BCLKR/CLKSEL 9 MCLKR/PDN 10 20 VBB 19 VFXI+ 18 VFXI - 17 GSX 16 ANLG LOOP 15 TSX 14 FSX 13 DX 12 BCLKX 11 MCLKX These devices are designed to perform the transmit encoding (A/D conversion) and receive decoding (D/A conversion) as well as the transmit and receive filtering functions in a PCM system. They are intended to be used at the analog termination of a PCM line or trunk. The devices require two transmit and receive master clocks that may be asynchronous (1.536 MHz, 1.544 MHz, or 2.048 MHz), transmit and receive data clocks that are synchronous with the master clock (but can vary from 64 k Hz to 2.048 MHz), and transmit and receive frame-sync pulses. The TP3064A, TP3067A, TP13064A, and TP13067A provide the band-pass filtering of the analog signals prior to encoding and after decoding of voice and call progress tones. The TP3067A and TP13067A contain patented circuitry to achieve low transmit channel idle noise and are not remended for applications in which the posite signals on the transmit side are below - 55 d Bm0. The TP3064A and TP3067A are characterized for operation from 0°C to 70°C. The TP13064A and TP13067A are characterized for operation from - 40°C to 85°C. These devices have limited...