Datasheet4U Logo Datasheet4U.com

TPIC2406 - INTELLIGENT-POWER QUAD MOSFET LATCH

Description

The TPIC2406 is a monolithic, high-voltage, high-current, quadruple power driver designed for use in systems that require high load power.

The device contains built-in high-speed output clamp diodes for inductive transient protection.

Features

  • four inverting open-drain outputs, each controlled by an input storage latch with common clear and enable controls. All inputs accept standard TTL- and CMOS-logic levels. The CLR function is asynchronous and turns all four outputs off regardless of data inputs. Taking ENBL low puts the input latch into a transparent mode, allowing the data inputs to affect the output. In this state, all four outputs are held off while CLR is low, but return to the stages on the data inputs when CLR goes high. Wh.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPI Tripolar protection STMicroelectronics
TPI-0805MH Multilayer Ceramic SMD Varistor ETC
TPI-0805ML Multilayer Ceramic SMD Varistor ETC
TPI-1206MH Multilayer Ceramic SMD Varistor ETC
TPI-1812MH Multilayer Ceramic SMD Varistor ETC

Other Datasheets by Texas Instruments

Part Number Description
TPIC2401 4-CHANNEL COMMON-SOURCE POWER DMOS ARRAY
TPIC2404 INTELLIGENT-POWER QUAD LOW-SIDE SWITCH
TPIC2010 Serial I/F Controlled 9-Channel Motor-Driver
TPIC2030 Serial I/F Controlled 7-Channel Motor-Driver
TPIC2040 Serial I/F Controlled 7-Channel Motor-Driver

Full PDF Text Transcription

Click to expand full text
ą TPIC2406 INTELLIGENTĆPOWER QUAD MOSFET LATCH ą SLIS012 − D3378, FEBRUARY 1990 • Output Voltage up to 60 V • Four Output Channels of 700-mA Nominal Current Per Channel • Pulsed Current . . . 3 A Per Channel • Low rDS(on) . . . 0.5 Ω Typ • Avalanche Energy . . . 50 mJ • Thermal Shutdown Protection With Fault (Overtemperature) Output • NE Package Designed for Heat Sinking • Integral Output Clamp Diodes • Input Transparent Latches for Data Storage • Asynchronous Clear to Turn off All Outputs • Output Parallel Capability for Increased Current Drive up to 12-A Total Pulsed Load Current description The TPIC2406 is a monolithic, high-voltage, high-current, quadruple power driver designed for use in systems that require high load power.
Published: |