TPS54612-EP Datasheet | Texas Instruments

.ti. Typical Size 6,6 mm X 9,8 mm TPS54611-EP, TPS54612-EP TPS54613-EP, TPS54614-EP TPS54615-EP, TPS54616-EP SGLS293A - FEBRUARY 2005 - REVISED AUGUST 2005 3-V TO 6-V INPUT, 6-A OUTPUT SYNCHRONOUS BUCK PWM SWITCHER WITH INTEGRATED FETs (SWIFT™) Features - Controlled Baseline - One Assembly/Test Site, One Fabrication Site - Extended Temperature Performance of - 55°C to 125°C - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product-Change Notification - Qualification Pedigree (1) - 30-mΩ, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source and Sink - 0.9-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed Output Voltage Devices With 1% Initial Accuracy - Internally pensated for Easy Use and Minimal ponent Count - Fast Transient Response - Wide PWM Frequency - Fixed 350 k Hz, 550 k Hz or Adjustable 280 k Hz to 700 k Hz - Load Protected by Peak Current Limit and Thermal Shutdown - Integrated Solution Reduces Board Area and Total Cost (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits. APPLICATIONS - Low-Voltage, High-Density Systems With Power Distributed at 5 V or 3.3 V - Point of Load Regulation for High Performance DSPs, FPGAs, ASICs and Microprocessors - Broadband, Networking and Optical munications Infrastructure - Portable puting/Notebook PCs DESCRIPTION...