TPS65192 Datasheet | Texas Instruments

FEATURES - 9-Channel Level Shifter Supports 6 × CLK, VST, ODD, and EVEN Signals - Organized as Two Groups of 7 + 2 Channels - Separate Positive Supplies (VGHX) for Each Group - VGHX Levels up to 38V - VGL Levels Down to - 13V - Panel DISCHARGE Function - Suitable for 4-Phase and 6-Phase Applications - Gate Voltage Shaping on Channels 1 to 6 - Supports Single and Multiple Flicker Clocks - Peak Output Currents greater than 500m A - 28-Pin 5×5 mm QFN Package APPLICATIONS - LCD Displays Using Gate-in-Panel (GIP) Technology DESCRIPTION The TPS65192 is a 9 channel level-shifter intended for use in LCD display applications such as TVs and monitors. The device converts the logic-level signals generated by the Timing Controller (T-CON) to the high-level signals used by the display panel. The 9 level shifter channels are organized as two groups. Channels 1 through 7 are powered from VGH1 and VGL, and channels 8 and 9 are powered from VGH2 and VGL. Each level-shifter channel features low impedance output stages that achieve fast rise and fall times even when driving the capacitive loading typically present in LCD display applications. Level shifter channels 1 through 6 support gate voltage shaping, which can be used to improve picture quality by reducing image sticking. Novel decoding logic enables a single flicker clock signal to control gate voltage shaping for all CLK channels without the need for synchronization. The device also supports the use of multiple flicker clocks. The rate of decay is set by an external resistor or resistor network connected to the RE pin. A tenth level shifter channel specially configured with a parator input stage allows designers to implement panel discharging during power-down. BLOCK DIAGRAM VGH1 IN1 IN2 IN3 IN4 IN5 IN6 IN7 VSENSE GND VGH2 IN8 IN9 VREF + Gate Shaping FLK1 FLK2 FLK3 RE OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 DISCHARGE OUT8 OUT9 Please be aware that an important notice concerning availability, standard warranty, and use...