TS3L100 Datasheet | Texas Instruments

description /ordering information The TI TS3L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. When E is low, the switch is enabled and the I port is connected to the Y port. When E is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING - RGY Tape and reel TS3L100RGYR TK100 SOIC - D Tube Tape and reel TS3L100D TS3L100DR 0°C to 70°C SSOP (QSOP) - DBQ Tape and reel TS3L100DBQR TK100 TSSOP - PW Tube Tape and reel TS3L100PW TS3L100PWR TK100 TVSOP - DGV Tape and reel TS3L100DGVR TK100 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 Copyright  2004, Texas Instruments Incorporated 1 TS3L100 QUAD SPDT WIDEĆBANDWIDTH LAN SWITCH WITH LOW ONĆSTATE RESISTANCE SCDS161A - MAY 2004 - REVISED OCTOBER 2004 description /ordering information (continued) This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN...