TS3L110 Description
The TS3L110 local area network (LAN) switch is a 4bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. When E is low, the switch is enabled, and the I port is connected to the Y port. When E is high, the switch is disabled, and the highimpedance state exists between the I and Y ports.
TS3L110 Key Features
- 1 Wide bandwidth (BW = 500 MHz typical)
- Low crosstalk (XTALK = -30 dB typical)
- Bidirectional data flow with near-zero propagation
- Low and flat ON-state resistance (ron = 4 Ω typical, ron(flat) = 1 Ω)
- Switching on Data I/O Ports (0 to 5 V)
- VCC Operating range from 3 V to 3.6 V
- Ioff Supports partial power-down-mode operation
- Data and control inputs have undershoot clamp
- Latch-up performance exceeds 100 mA Per JESD 78, class II
- ESD Performance tested per JESD 22