iC-WK Datasheet PDF - iC-Haus 2.4V CW LASER DIODE DRIVER Specs

iC-WK - 2.4V CW LASER DIODE DRIVER

This page provides the datasheet information for the iC-WK, a member of the iC-WK-iC 2.4V CW LASER DIODE DRIVER family.

Datasheet Summary

Description

The iC-WK device is a driver for laser diodes in continuous wave operation which requires only four external components.

The broad power supply range of 2.4V to 6V and the integrated reverse battery protection allow for battery operation with a minimum of two cells.

Features

° CW operation up to 60mA from 2.4..6V supply voltage ° Rapid soft start after power-on ° Simple power adjustment via the external resistor ° Control loop accuracy better than 1% with changes in temperature, supply voltage and load current ° Integrated reverse polarity protection for the iC and laser diode ° Strong suppression of transients with very small external capacitors ° Integrated flyback path protects against transients ° Permanent shutdown with excessive temperature and overcurrent (i.

Datasheet Details

Part number	iC-WK
Manufacturer	iC-Haus
File Size	343.88 KB
Description	2.4V CW LASER DIODE DRIVER
Datasheet	iC-WK Datasheet
Additional preview pages of the iC-WK datasheet.

📁 Similar Datasheet

IC-202 - Quick Guide (Konica)

IC-497 - 144-Pin DIMM (Yamaichi)

IC-553 - 160-pin DIMM (Yamaichi Electronics)

IC-554 - 72-pin DIMM (Yamaichi Electronics)

IC-706MKIIG - HF/VHF/UHF ALL MODE TRANSCEVER Service Manual (Icom)

IC-7400 - HF/VHF ALL MODE TRANSCEIVER Service Manual (Icom)

IC-A110 - VHF AIR BAND Transceiver (ICOM)

IC-B160203-6YFLYA - LCD (Illuminant)

IC-B160401-6YFLYA - LCD (Illuminant)

IC-B200202-6YFLYA - LCD (Illuminant)

Full PDF Text Transcription

Click to expand full text

iC-WK 2.4V CW LASER DIODE DRIVER FEATURES ° CW operation up to 60mA from 2.4..6V supply voltage ° Rapid soft start after power-on ° Simple power adjustment via the external resistor ° Control loop accuracy better than 1% with changes in temperature, supply voltage and load current ° Integrated reverse polarity protection for the iC and laser diode ° Strong suppression of transients with very small external capacitors ° Integrated flyback path protects against transients ° Permanent shutdown with excessive temperature and overcurrent (i.e. if the laser diode is damaged or the feedback current path fails) ° Two feedback inputs permit all current LD types to be used (M/P/N configurations) ° Modulation via the feedback inputs is possible ° Wide monitor current range from 10µA to 2.

Published: Mar 13, 2015 |