Datasheet4U Logo Datasheet4U.com

74ALVC16835A - 18-bit registered driver

Datasheet Summary

Description

The 74ALVC16835A is a 18

bit registered driver.

Data flow is controlled by active low output enable (OE), active low latch enable (LE) and clock inputs (CP).

When LE is LOW, the A to Y data flow is transparent.

Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low-power consumption.
  • Direct interface with TTL levels.
  • Current drive ± 24 mA at 3.0 V.

📥 Download Datasheet

Datasheet preview – 74ALVC16835A

Datasheet Details

Part number 74ALVC16835A
Manufacturer nexperia
File Size 189.02 KB
Description 18-bit registered driver
Datasheet download datasheet 74ALVC16835A Datasheet
Additional preview pages of the 74ALVC16835A datasheet.

📁 Similar Datasheet

  • 74ALVC16835A - 18-bit registered driver 3-State (NXP)
  • 74ALVC16835 - Low Voltage 18-Bit Universal Bus Driver (Fairchild Semiconductor)
  • 74ALVC16834A - 18-bit registered driver (NXP)
  • 74ALVC16836A - 20-bit registered driver (NXP)
  • 74ALVC16839 - Low Voltage 20-Bit Selectable Register/Buffer (Fairchild Semiconductor)
  • 74ALVC16821 - Low Voltage 20-Bit D-Type Flip-Flops (Fairchild Semiconductor)
  • 74ALVC16827 - Low Voltage 20-Bit Buffer/Line Driver (Fairchild Semiconductor)
  • 74ALVC16841 - Low Voltage 20-Bit Transparent Latch (Fairchild Semiconductor)
  • 74ALVC162240 - Low Voltage 16-Bit Inverting Buffer/Line Driver (Fairchild Semiconductor)
  • 74ALVC162244 - Low Voltage 16-Bit Buffer/Line Driver (Fairchild Semiconductor)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74ALVC16835A 18-bit registered driver; 3-state Rev. 7 — 19 January 2018 Product data sheet 1 General description The 74ALVC16835A is a 18–bit registered driver. Data flow is controlled by active low output enable (OE), active low latch enable (LE) and clock inputs (CP). When LE is LOW, the A to Y data flow is transparent. When LE is HIGH and CP is held at LOW or HIGH, the data is latched; on the LOW to HIGH transient of CP the A-data is stored in the latch/flip-flop. When OE is LOW the outputs are active. When OE is HIGH, the outputs go to the high impedance OFF–state. Operation of the OE input does not affect the state of the latch/flip-flop.
Published: |