Datasheet4U Logo Datasheet4U.com

74CBTLV1G125 - Single bus switch

General Description

The 74CBTLV1G125 is a single high-speed line switch.

The switch is disabled when the output enable (OE) input is high.

To ensure the high-impedance OFF-state during power-up or power-down, tie OE to the VCC through a pull-up resistor.

Key Features

  • Supply voltage range from 2.3 V to 3.6 V.
  • Overvoltage tolerant control inputs to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standard:.
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8C (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C101E exceeds 1000 V.
  • 5 Ω switch connection between two ports.
  • Rail to rail switching on data I/O ports.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74CBTLV16210 LOW-VOLTAGE 20-BIT BUS SWITCH Renesas
74CBTLV16212 LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH IDT
74CBTLV16212 LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH Renesas
74CBTLV3125 4-bit bus switch NXP
74CBTLV3126 4-bit Bus Switch NXP

Other Datasheets by Nexperia

Part Number Description
74CBTLV3125 4-bit bus switch
74CBTLV3125-Q100 4-bit bus switch
74CBTLV3126 4-bit bus switch
74CBTLV3126-Q100 4-bit bus switch
74CBTLV3244 8-bit bus switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74CBTLV1G125 Single bus switch Rev. 7.1 — 12 February 2022 Product data sheet 1. General description The 74CBTLV1G125 is a single high-speed line switch. The switch is disabled when the output enable (OE) input is high. To ensure the high-impedance OFF-state during power-up or power-down, tie OE to the VCC through a pull-up resistor. The current-sinking capability of the driver determines the minimum value of the resistor. Schmitt-trigger action at control inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. 2.