Datasheet4U Logo Datasheet4U.com

74HC377-Q100 - Octal D-type flip-flop

General Description

The 74HC377-Q100; 74HCT377-Q100 is an octal positive-edge triggered D-type flip-flop.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Common clock and master reset.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC377 Octal D-type flip-flop NXP
74HC377 Octal D-Type Flip-Flop Texas Instruments
74HC373 Octal Transparent D-Type Latches Texas Instruments
74HC373 Octal D-type transparent latch NXP
74HC373D Octal D-Type Latch Toshiba

Other Datasheets by Nexperia

Part Number Description
74HC377 Octal D-type flip-flop
74HC377D Octal D-type flip-flop
74HC373 Octal D-type transparent latch
74HC373-Q100 Octal D-type transparent latch
74HC373D Octal D-type transparent latch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC377-Q100; 74HCT377-Q100 Octal D-type flip-flop with data enable; positive-edge trigger Rev. 3 — 5 August 2024 Product data sheet 1. General description The 74HC377-Q100; 74HCT377-Q100 is an octal positive-edge triggered D-type flip-flop. The device features clock (CP) and data enable (E) inputs. When E is LOW, the outputs Qn assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. Input E must be stable one set-up time prior to the LOW-to-HIGH transition for predictable operation. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.