Datasheet4U Logo Datasheet4U.com

74LV4066D - Quad bilateral switches

Download the 74LV4066D datasheet PDF. This datasheet also covers the 74LV4066 variant, as both devices belong to the same quad bilateral switches family and are provided as variant models within a single manufacturer datasheet.

General Description

The 74LV4066 is a quad single pole, single throw analog switch.

Key Features

  • Wide supply voltage range from 1.0 to 6.0 V.
  • CMOS low power dissipation.
  • Direct interface with TTL levels.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8C (2.7 V to 3.6 V).
  • JESD36 (4.5 V to 5.5 V).
  • Typical VOLP (output ground bounce): < 0.8 V at VCC = 3.3 V and Tamb = 25 °C.
  • Very low ON-r.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74LV4066-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74LV4066 Quad bilateral switches Philips
74LV4060 14-stage binary ripple counter Philips
74LV4067 16-channel analog multiplexer/demultiplexer NXP
74LV4040 12-stage binary ripple counter Philips
74LV4051 8-channel analog multiplexer/demultiplexer Philips

Other Datasheets by Nexperia

Part Number Description
74LV4066 Quad bilateral switches
74LV4060 14-stage binary ripple counter
74LV4060-Q100 14-stage binary ripple counter
74LV4060D 14-stage binary ripple counter
74LV4051 8-channel analog multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LV4066 Quad bilateral switches Rev. 5 — 24 October 2022 Product data sheet 1. General description The 74LV4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Digital inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC. 2. Features and benefits • Wide supply voltage range from 1.0 to 6.0 V • CMOS low power dissipation • Direct interface with TTL levels • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • Complies with JEDEC standards: • JESD8-7 (1.65 V to 1.95 V) • JESD8-5 (2.3 V to 2.7 V) • JESD8C (2.7 V to 3.6 V) • JESD36 (4.5 V to 5.