Datasheet4U Logo Datasheet4U.com

74LVC1G19 - 1-of-2 decoder/demultiplexer

Description

The 74LVC1G19 is a 1-of-2 decoder/demultiplexer with a common output enable.

This device buffers the data on input A and passes it to the outputs 1Y (true) and 2Y (complement) when the enable (E) input signal is LOW.

A HIGH E causes both outputs to assume a HIGH state.

Features

  • Wide supply voltage range from 1.65 V to 5.5 V.
  • Overvoltage tolerant inputs to 5.5 V.
  • High noise immunity.
  • ±24 mA output drive (VCC = 3.0 V).
  • CMOS low power dissipation.
  • Latch-up performance exceeds 250 mA.
  • Direct interface with TTL levels.
  • IOFF circuitry provides partial Power-down mode operation.
  • Complies with JEDEC standard:.
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8C.

📥 Download Datasheet

Datasheet preview – 74LVC1G19

Datasheet Details

Part number 74LVC1G19
Manufacturer nexperia
File Size 239.81 KB
Description 1-of-2 decoder/demultiplexer
Datasheet download datasheet 74LVC1G19 Datasheet
Additional preview pages of the 74LVC1G19 datasheet.

📁 Similar Datasheet

  • 74LVC1G19 - 1-of-2 decoder/demultiplexer (NXP)
  • 74LVC1G10 - SINGLE 3 INPUT POSITIVE NAND GATE (Diodes)
  • 74LVC1G11 - Single 3-input AND gate (NXP)
  • 74LVC1G11 - SINGLE 3 INPUT POSITIVE AND GATE (Diodes)
  • 74LVC1G123 - Single retriggerable monostable multivibrator (NXP)
  • 74LVC1G125 - SINGLE BUFFER GATE (Diodes)
  • 74LVC1G125 - Bus buffer/line driver (NXP Semiconductors)
  • 74LVC1G126 - Bus buffer/line driver (NXP)
  • 74LVC1G126 - SINGLE BUFFER GATE (Diodes)
  • 74LVC1G14 - Single Schmitt-trigger inverter (NXP)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC1G19 1-of-2 decoder/demultiplexer Rev. 10 — 27 January 2022 Product data sheet 1. General description The 74LVC1G19 is a 1-of-2 decoder/demultiplexer with a common output enable. This device buffers the data on input A and passes it to the outputs 1Y (true) and 2Y (complement) when the enable (E) input signal is LOW. A HIGH E causes both outputs to assume a HIGH state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices in a mixed 3.3 V and 5 V environment. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF.
Published: |