Datasheet4U Logo Datasheet4U.com

74LVC374A-Q100 - Octal D-type flip-flop

General Description

The 74LVC374A-Q100 is an octal positive-edge triggered D-type flip-flop with 3-state outputs.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • Overvoltage tolerant inputs to 5.5 V.
  • CMOS low power dissipation.
  • Direct interface with TTL levels.
  • IOFF circuitry provides partial Power-down mode operation.
  • 8-bit positive edge-triggered register.
  • Independent register and 3-state buffer.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC374A Octal D-type flip-flop NXP
74LVC374A OCTAL D-TYPE FLIP-FLOP STMicroelectronics
74LVC374A OCTAL D-TYPE FLIP-FLOP Diodes
74LVC374A Low-Voltage CMOS Octal D-Type Flip-Flop ON Semiconductor
74LVC373A Octal D-type transparent latch NXP

Other Datasheets by Nexperia

Part Number Description
74LVC374A Octal D-type flip-flop
74LVC373A Octal D-type transparent latch
74LVC373A-Q100 Octal D-type transparent latch
74LVC377 Octal D-type flip-flop
74LVC30A 8-input NAND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC374A-Q100 Octal D-type flip-flop; 5 V tolerant inputs/outputs; positive-edge trigger; 3-state Rev. 2 — 24 August 2020 Product data sheet 1. General description The 74LVC374A-Q100 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.