Datasheet4U Logo Datasheet4U.com

NCA9548A-Q100 - 8-channel I2C-bus switch

General Description

The NCA9548A-Q100 is an octal bidirectional translating switch controlled via the I²C-bus.

The SCL/ SDA upstream pair fans out to eight downstream pairs, or channels.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • 1-of-8 bidirectional translating switches.
  • I²C-bus interface logic; compatible with SMBus standards.
  • Active LOW reset input.
  • Three address pins allowing up to eight devices on the I²C-bus.
  • Channel selection via I²C-bus, in any combination.
  • Power-up with all switch channels deselected.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCA9511 Hot Swappable I2C Bus and SMBus Buffer NOVOSENSE
NCA9534B 8-bit I2C-bus I/O port NOVOSENSE
NCA9555 16-bit I2C-bus I/O port NOVOSENSE
NCA9555B 16-bit I2C-bus I/O port NOVOSENSE
NCA0805NPO100J100TRPF Multilayer Ceramic Chip Capacitors NIC

Other Datasheets by Nexperia

Part Number Description
NCA9548A 8-channel I2C-bus switch
NCA9547A 8-channel I2C-bus multiplexer
NCA9547A-Q100 8-channel I2C-bus multiplexer
NCA9535 Low-voltage 16-bit I2C and SMBus low-power I/O expander
NCA9535-Q100 Low-voltage 16-bit I2C and SMBus low-power I/O expander

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCA9548A-Q100 8-channel I²C-bus switch with reset Rev. 1 — 20 August 2025 Product data sheet 1. General description The NCA9548A-Q100 is an octal bidirectional translating switch controlled via the I²C-bus. The SCL/ SDA upstream pair fans out to eight downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. An active LOW reset input allows the NCA9548AQ100 to recover from a situation where one of the downstream I²C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I²C-bus state machine and causes all the channels to be deselected as does the internal Power-on reset function.