Datasheet4U Logo Datasheet4U.com

NPS4053-Q100 - load switch

General Description

The NPS4053-Q100 is a 5.5 V, 55 mΩ load switch with precision adjustable current limit from 110 mA to 2.5 A.

The NPS4053-Q100 switch limits the output current to a constant current by using a constant-current mode when the output load exceeds the current limit threshold or shorted.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +125 °C.
  • Input operating voltage range (VIN): 2.5 V to 5.5 V.
  • Maximum continuous current (IMAX): 2 A.
  • ON resistance (RDS(on)):.
  • VIN = 5.5 V: 55 mΩ (typical).
  • VIN = 3.6 V: 65 mΩ (typical).
  • VIN = 2.5 V: 80 mΩ (typical).
  • Adjustable current limit: 110 mA to 2.5 A.
  • ±6 % current limit accuracy at 1.2 A.
  • ILIM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NPS40 Press Fit SCR Naina Semiconductor
NPS-201A1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA2 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA3 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor

Other Datasheets by Nexperia

Part Number Description
NPS4053 load switch
NPS4001 5.5V load switch
NPS4069 5.5V load switch
NPS1000 load switch
NPS3005 6A single channel load switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NPS4053-Q100 5.5 V, 55 mΩ load switch with precision adjustable current limit Rev. 2 — 20 October 2023 Product data sheet 1. General description The NPS4053-Q100 is a 5.5 V, 55 mΩ load switch with precision adjustable current limit from 110 mA to 2.5 A. The NPS4053-Q100 switch limits the output current to a constant current by using a constant-current mode when the output load exceeds the current limit threshold or shorted. An internal voltage comparator disables the load switch when the output voltage is higher than the input to protect devices on the input side of the switch. The FLG pin is an active low output to indicate overcurrent, over temperature and reverse voltage conditions.