Datasheet4U Logo Datasheet4U.com

NPS1000 - load switch

General Description

NPS1000 is a low voltage, single-channel load switch with a low RDS,ON (11 mΩ) to minimize IR drop and power loss.

It supports up to 0.6 A RMS current and a peak current of 1.5 A.

The switch is controlled by an EN input which is compatible with 1.2 V logic levels.

Key Features

  • 0.5 V.
  • 1.0 V operation voltage.
  • Low RDS,ON: 11 mΩ typical at 25 °C, 16 mΩ (maximum) at 85 °C.
  • Enable logic supports 1.2 V logic levels.
  • 0.6 A RMS and 1.5 A peak current capability.
  • Controlled start-up.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NPS-201A1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA2 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA3 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxD1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor

Other Datasheets by Nexperia

Part Number Description
NPS3005 6A single channel load switch
NPS3005-Q100 6A single channel load switch
NPS3102A 12V eFuse
NPS3102B 12V eFuse
NPS4001 5.5V load switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WLCSP8 NPS1000 0.5 V to 1.0 V, 1.5 A peak, 11 mΩ, load switch Rev. 1 — 29 March 2024 Product data sheet 1. General description NPS1000 is a low voltage, single-channel load switch with a low RDS,ON (11 mΩ) to minimize IR drop and power loss. It supports up to 0.6 A RMS current and a peak current of 1.5 A. The switch is controlled by an EN input which is compatible with 1.2 V logic levels. When the load switch is enabled, the internal switch charges the output capacitor with a controlled inrush current. When the switch is disabled, an 8 Ω on-chip resistor discharges the output to ground and keeps it from floating. The IC is powered from a separate BIAS pin which is rated for 2.3 V to 5.0 V operation.