Datasheet4U Logo Datasheet4U.com

NPS3102A - 12V eFuse

General Description

NPS3102A and NPS3102B are low-ohmic (17 mΩ), high current (13.5 A), resettable electronic fuses that are targeted for 12 V applications.

They are designed to protect downstream loads from exposure to excessive voltage and protect the power supply from load faults and large inrush currents.

Key Features

  • Up to 18 V operating range, 21 V absolute maximum.
  • Integrated 17 mΩ pass MOSFET.
  • 15 V output voltage clamp.
  • 2 A to 13.5 A adjustable output current clamp.
  • 2 µs short circuit protection response time.
  • Programmable output rise time control.
  • Built-In thermal shutdown with fault alert pin.
  • Fault response options: latch-off, auto-retry.
  • Leadless plastic package; 10 terminals, body 3.0 x 3.0 x 0.75 mm (DFN3030-10/SOT8037.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NPS35 Press Fit SCR Naina Semiconductor
NPS-201A1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA1 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA2 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor
NPS-xxxA3 (PS Series) Solid State Sensor Absolute or Differential Pressure Nova Sensor

Other Datasheets by Nexperia

Part Number Description
NPS3102B 12V eFuse
NPS3005 6A single channel load switch
NPS3005-Q100 6A single channel load switch
NPS1000 load switch
NPS4001 5.5V load switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NPS3102A; NPS3102B 12 V, 2 A to 13.5 A, 17 mΩ eFuse Rev. 1 — 18 July 2024 Product data sheet 1. General description NPS3102A and NPS3102B are low-ohmic (17 mΩ), high current (13.5 A), resettable electronic fuses that are targeted for 12 V applications. They are designed to protect downstream loads from exposure to excessive voltage and protect the power supply from load faults and large inrush currents. Output slew rate is controlled by a capacitor at dVdt pin. Current limit can be adjusted in the 2 A to 13.5 A range using a resistor at ILIM pin. The voltage at ILIM pin can also be used as a measure of the load current in real-time. The devices include a built-in over voltage clamp that will limit the output voltage during input over voltage conditions.