NXS0104 Datasheet | Nexperia

Dual supply translating transceiver; open drain; auto direction sensing Rev. 4 - 30 June 2021 Product data sheet 1. General description The NXS0104 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It Features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits - Wide supply voltage range: - VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V - Maximum data rates: - Push-pull: 24 Mbps - IOFF circuitry provides partial Power-down mode operation - Inputs accept voltages up to 5.5 V - ESD protection: - HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 k V for A port - HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 k V for B port - CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 k V - IEC61000-4-2 contact discharge exceeds 8000 V for B port - Latch-up performance exceeds 100 m A per JESD 78B Class II - Multiple package options - Specified from -40 °C to +85 °C and -40 °C to +125 °C 3. Applications - Desktop PC - Handset - Smartphone - Tablet Nexperia Dual supply translating transceiver; open drain; auto direction sensing 4. Ordering information Table 1. Ordering information Type number...